Techie A1405 Battery Replacement Guide

A1405 Battery Replacement

Tools & Part Required

Parts

Techie Compatible Apple A1405 Battery for MacBook Air 13.3 inch A1466 A1369 Apple A1496 Laptop model.
Buy Now
Tools
  1. P5 Pentalobe Screwdriver (Comes with Techie Battery)
  2. T5 Screwdriver (Comes with Techie Battery)

Steps Of Replacement

Introduction

Here we will guide you to install Techie A1405 laptop battery. To demonstrate the replacement we will be using a Apple MacBook Air A1466 laptop. The procedure will be similar for all laptop models that are compatible with A1405 laptop battery. You can check out the compatible list here (link).
Follow the guide step by step so that you can replace the battery properly.

Note: Make sure your laptop is not connected to any power source and it is turned off.

Step 1: Unscrewing Back Case

  • Place the laptop upside down.
  • There will be 10 screws which can opened via P5 Pentalobe screwdriver.
  • Once all the screws are open, wedge the finger between the laptop body and the back panel at the top and pull up the case and place it aside.
Easy Step by Step A1405 Battery Replacement Guide  Be certain to save the screws carefully as they’re easy to lose.

Step 2: Removing Old Battery

  • The battery will be connected via 5 screws and a connector to the laptop .
  • Unscrew all the five screws using T5 screwdriver.
Easy Step by Step A1405 Battery Replacement Guide  Be certain to save the screws carefully as they’re easy to lose.

Step 3: Disconnecting Connector

  • Locate the connector which is connecting the battery from main circuit board.
  • Gently push back the connector to disconnect the battery from the internal board.
  • Once the battery is disconnected, lift the battery from the edges and keep it aside.
Easy Step by Step A1405 Battery Replacement Guide
  When handling the battery avoid touching or puncturing the 4 exposed lithium polymer cells pack.

Step 4: Installing New Battery

  • Put the new Techie A1405 laptop battery over the battery compartment and connect the connector to the board gently.
  • Now place the battery in the compartment and screw back all the five screws.
Easy Step by Step A1405 Battery Replacement Guide
  When handling the battery avoid touching or puncturing the 4 exposed lithium polymer cells pack.

Step 5: Ready to use

  • Put back the back panel and screw back all the screws and flip back the laptop.
  • Press on the power button to turn on the laptop and enjoy the fresh power of A1405 laptop battery.

Leave a Reply

Your email address will not be published. Required fields are marked *